Zanussi ZDT36001FA 사용자 설명서 - 페이지 8
{카테고리_이름} Zanussi ZDT36001FA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDT36001FA 21 페이지.
페이지 인쇄
•
Activation or deactivation of AirDry.
Before entering the user mode, make sure the
appliance is in the programme selection mode.
To enter the user mode:
Press and hold simultaneously
least 3 seconds.
The indicators:
,
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
ADJUSTING THE WATER SOFTENER
Make sure the appliance is in user mode.
1. Press
.
•
The indicators
•
The indicator
THE WATER HARDNESS TABLE
German degrees
French degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting
2) Do not use salt at this level.
DEACTIVATING THE RINSE AID EMPTY
NOTIFICATION
Make sure the appliance is in user mode.
1. Press
.
•
The indicators
•
The indicator
•
The display shows the current setting:
–
= rinse aid empty notification
activated.
8
and
for at
,
, and
start flashing.
,
and
are off.
still flashes.
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
,
and
are off.
still flashes.
•
The display shows the current setting: e.g.
= level 5.
2. Press
to change the setting. Each pressing
of the button
one. After reaching level 10, the count starts
from level 1
3. Press the on/off button to confirm the setting.
If you use multi-tablets containing salt
and the hardness of your water is
lower than 21°dH, you can set the
lowest water softener level. It
deactivates the salt refill indicator.
If you use standard detergent or
multitablets without salt, set the proper
water hardness level to keep the salt
refill indicator active.
mmol/l
Clarke degrees
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
–
deactivated.
2. Press
to change the setting.
3. Press on/off button to confirm the setting.
increases the level number by
Water softener
level
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
= rinse aid empty notification
10
9
8
7
6
1)
5
4
3
2
2)
1