Zanussi ZDTS 102 사용자 설명서 - 페이지 4
{카테고리_이름} Zanussi ZDTS 102에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDTS 102 16 페이지.
페이지 인쇄
• To set the water softener. Refer to the chapter 'Setting
the water softener'.
• To deactivate/activate the audible signals. Refer to the
section 'Audible signals'.
• To cancel a washing programme in progress. Refer to
the chapter 'Setting and starting a washing pro-
gramme'.
Setting mode
The appliance is in setting mode when all the programme
indicator lights are off and the end-of-programme indi-
cator light flashes.
The appliance must be in setting mode for these opera-
tions:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the audible signals.
The appliance is not in setting mode when only one pro-
gramme indicator light is on. Cancel the programme to
go back to the setting mode. Refer to the chapter 'Setting
and starting a washing programme'.
Programme indicator lights A and B
Apart the selection of the corresponding washing pro-
gramme, these lights have an auxiliary functions:
• The adjustment of the water softener level.
• Deactivation/activation of the audible signals.
Audible signals
You can hear an audible signal:
Washing programmes
Washing programmes
Programme
Intensive 70°
Normal 65°
4
Degree of soil
Heavy soil
Normal soil
• At the end of the washing programme.
• When the appliance has a malfunction.
The activation of the audible signals is set at the factory.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme selection/cancel but-
ton until programme indicator light A flashes and
programme indicator light B comes on.
4. Press the programme selection/cancel button again.
– Programme indicator light A comes on.
– Programme indicator light B starts to flash.
5. Wait until programme indicator light A goes off.
– Programme indicator light B continues to flash.
– The end-of-programme indicator light comes on.
The audible signals are activated.
6. Press the programme selection/cancel button again.
– The end-of-programme indicator light goes off.
The audible signals are deactivated.
7. Switch off the appliance to save the operation.
Do these steps to activate the audible signals:
1. Do the above procedure until the end-of-programme
indicator light comes on.
Type of load
Crockery, cutlery,
pots and pans
Crockery and cutlery
Programme description
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying