Zanussi ZDV 12001 사용자 설명서 - 페이지 10

{카테고리_이름} Zanussi ZDV 12001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDV 12001 16 페이지. Dishwasher

페이지 인쇄

1. Control Panel

Cleaning the filters

To remove filters (B)

and (C), turn the han-

dle counterclockwise

and remove. Pull

apart filter (B) and

(C). Wash the filters

with water.

Troubleshooting

The appliance does not start or it stops during

operation.

First try to find a solution to the problem (refer

to the table). If not, contact the Service.

Alarm code

• The indicator of the set programme flashes contin-

uously.

• The end indicator flashes 1 time intermittently.

• The indicator of the set programme flashes contin-

uously.

• The end indicator flashes 2 times intermittently.

Remove filter (A).

Wash the filter with

water.

Put filter (A) to its ini-

tial position. Make

sure that it assembles

correctly under the

two guides (D).

An incorrect position of the filters can

cause bad washing results and damage to

the appliance.

Cleaning the spray arms

Do not remove the spray arms.

If the holes in the spray arms are clogged, re-

move remaining parts of soil with a thin pointed

object.

External cleaning

Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use abra-

sive products, abrasive cleaning pads or sol-

vents.

With some problems, some indicators

flash continuously and/or intermittently

at the same time to show an alarm code.

Problem

The appliance does not fill with water.

The appliance does not drain the water.

Assemble filters (B)

and (C). Put them in-

to position in filter

(A). Turn the handle

clockwise until it

locks.