Zanussi ZDV14003FA 사용자 설명서 - 페이지 37

{카테고리_이름} Zanussi ZDV14003FA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDV14003FA 49 페이지.

페이지 인쇄

Programme

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

2) With this programme you have the most efficient use of water and energy consumption for crockery and

cutlery with normal soil. (Also, it is a standard programme for test institutes).

3) The appliance senses the degree of soil and the quantity of items in the baskets to adjust the tempera-

ture and the quantity of the water and to control the energy consumption and the programme duration.

4) With this programme you can wash a load with fresh soil. It gives good washing results in a short period

of time.

5) Use this programme to quickly rinse the dishes and to prevent the food remains from drying out on the

dishes and to reduce bad odour coming out from the appliance. Do not use detergent with this pro-

gramme.

SETTINGS

PROGRAMME SELECTION MODE

In the programme selection mode, it is possible to

set a washing programme and to enter the user

mode to change the appliance settings.

To enter the programme selection mode:

Press on/off button.

The indicator

If the control panel does not indicate that the

appliance is in the programme selection mode,

follow the Cancel procedure.

CANCEL PROCEDURE

Use Cancel to:

•

Cancel a currently running programme.

•

Stop the countdown of Delay option.

•

Bring the appliance back to the programme

selection mode.

To Cancel:

Degree of soil

Programme phases

Type of load

Heavy soil

Crockery, cut-

lery, pots and

pans

Fresh soil

Crockery and

cutlery

All

is on.

•

Pre-wash

•

Wash 70 °C

•

Rinses

•

Dry

•

Wash 60 °C

or 65 °C

•

Rinses

•

Pre-wash

Press and hold simultaneously

until the control panel indicates the appliance is in

the programme selection mode.

USER MODE

The user mode allows changing the following

appliance settings:

•

Adjust the level of the water softener according

to the water hardness.

•

Activate or deactivate the rinse aid empty

notification.

•

Activate or deactivate the acoustic signal

indicating the end of a programme.

•

Activate or deactivate AirDry.

Before entering the user mode, make sure the

appliance is in the programme selection mode.

To enter the user mode:

Press and hold simultaneously

for at least 3 seconds.

Consumption values

Duration

Energy

(min)

(kWh)

130 -

1.0 - 1.2

150

0.6 - 0.8

0.1

Water

(l)

11 - 13

and