Zanussi ZDW 416 BU 지침 책자 - 페이지 5

{카테고리_이름} Zanussi ZDW 416 BU에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZDW 416 BU 16 페이지. Dishwasher zdw 416 fs; zdw 416 bu

Fitting under a counter

(kitchen worktop or sink)

This dishwasher is designed to be fitted under a kitchen

counter or sink.

In either case, it is essential that the recess dimensions

indicated in the picture are followed.

No further openings for venting of the dishwasher are

required, but only to let the water fill and drain hoses

and power supply cable pass through.

II28

The recess height may be anywhere between 820

and 880 mm from the floor since the dishwasher

incorporates levelling feet adjustable over a wide

range (max 60 mm).

Adjust the height of the appliance by turning these

feet.

A distance of 2 mm should be allowed between the

top of the dishwasher and the counter top.

It is absolutely essential that the dishwasher is

disconnected from the electricity supply before gaining

access to any internal component.

Fit the dishwasher into the appropriate housing space

and connect it. Make sure that the water fill and drain

hoses and the power supply cable are not bent or

kinked.

Adjust the height of the plinth by following the instruc-

tions shown in the figure.

IN10

(ZDW 416 BU)

II06

Securing under a counter

Open the door; vertically insert the two mounting

brakets (A) on the front part of the dishwasher and

turn them 90° (see figure).

Secure the brakets to the counter by means of two

3,5 x 16 screws provided.

II18

Caution

Once the machine has been installed, ensure that it

can be accessed easily for servicing.

PIN23GB

(ZDW 416 BU)