Zanussi ZSF 4143 사용자 설명서 - 페이지 23

{카테고리_이름} Zanussi ZSF 4143에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZSF 4143 24 페이지.

Electrical connection

CAUTION!

Safety standards require the appliance to be

earthed.

Prior to using the appliance for the first time,

ensure that the rated voltage and type of supply

on the rating plate match that of the supply

where the appliance is to be installed.

The fuse rating is also to be found on the rating

plate.

Always plug the mains plug into a correctly in-

stalled shockproof socket. Multi-way plugs,

connectors and extension cables must not be

used.

This could constitute a fire hazard through over-

heating.

If necessary, have the domestic wiring system

socket replaced. In case that the electrical ca-

Levelling

Good levelling is essential for correct closure and

sealing of the door.

When the appliance is correctly levelled, the door will

not catch on either side of the cabinet.

ble has to be replaced, contact your local Serv-

ice Force centre.

The plug must be accessible after the appliance

has been installed.

Never unplug the appliance by pulling on the

cable. Always pull the plug.

The manufacturer accepts no liability for failure

to observe the above safety precautions.

By removing the dishwasher's worktop, you can

install it under a close fitting sink unit or a pre-

existing top.

Be sure that once the appliance has been in-

stalled, it is easily accessible for the service

engineer in the event that a repair is required.