Zanussi ZSF2450S 사용자 설명서 - 페이지 7

{카테고리_이름} Zanussi ZSF2450S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZSF2450S 16 페이지. Product manaul
Zanussi ZSF2450S에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

Fill the detergent dis-

penser (A) with deter-

gent.

Using the combi detergent tablets

When you use tablets, that contain salt and

rinse aid, do not fill the salt container and the

rinse aid dispenser.

1. Adjust the water softener to the lowest level.

2. Set the rinse aid dispenser to the lowest po-

sition.

If you stop to use the combi detergent

tablets, before you start to use separately

detergent, rinse aid and dishwasher salt,

do these steps:

1. Press the on/off button to activate the appli-

ance.

2. Set the water softener to the highest level.

3. Make sure that the salt container and the

rinse aid dispenser are full.

4. Start the shortest programme with a rinsing

phase, without detergent and without

dishes.

www.zanussi.com

If you use a washing

programme with pre-

wash phase, put more

detergent in the pre-

wash detergent com-

partment (B).

5. Adjust the water softener to the water hard-

ness in your area.

6. Adjust the released quantity of rinse aid.

Setting and starting a programme

Setting mode

The appliance must be in setting mode to ac-

cept some operations.

The appliance is in setting mode when, after the

activation:

• All the programme indicators are on.

If the control panel shows other conditions,

press and hold function buttons (B) and (C) at

the same time until the appliance is in setting

mode.

Starting a programme without delay start

1. Open the water tap.

2. To set a programme, keep the appliance

door ajar.

3. Press the on/off button to activate the appli-

ance.

4. Make sure that the appliance is in setting

mode.

5. Press the button of the programme you

want to set.

• The programme duration flashes in the

display.

• The related programme indicator comes

on.

• The wash indicator comes on.

6. Close the appliance door. The programme

starts.

• The display shows the programme dura-

tion that decreases with steps of 1 mi-

nute.

• The wash indicator stays on.

Starting a programme with delay start

1. Set the programme.

2. Press the delay button again and again until

the display shows the delay time you want

to set (from 1 to 19 hours).

• The delay time flashes in the display.

• The delay indicator comes on.