Zanussi ZT 685 지침 책자 - 페이지 25

{카테고리_이름} Zanussi ZT 685에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZT 685 32 페이지. Zanussi instruction booklet dishwasher zt 685

Water outlet hose

connection

The end of the drain hose can be connected in the

following ways:

A- To the sink outlet siphon, securing it if necessary

with a clip.

B- To a wall outlet provided with a vent-hole, minimum

internal diameter 4 cm.

The waste connection must be at a height of between 30

cm (minimum) and 100 cm (maximum) from the floor.

It makes no difference which way the drain hose faces,

either to the right or left of the dishwasher.

Ensure the hose is not bent or squashed as this could

prevent or slow down the discharge of water.

C- If you use a drain hose extension it must be no longer

than 2 metres and its internal diameter must be no

smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used for

connections to the waste outlet must be no smaller than

the diameter of the hose provided.

The sink plug must not be in place when

the machine is draining as this could cause

the water to siphon back into the machine.

CS11

+ 2 m max

PWA04UK