Zanussi ZT 685 지침 책자 - 페이지 7

{카테고리_이름} Zanussi ZT 685에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZT 685 32 페이지. Zanussi instruction booklet dishwasher zt 685

Filling with salt

If your water is "level 0" it is already soft and therefore

there is no need to use salt. (In this case the salt refill

indicator light will remain illuminated).

Salt must be used from "level 1" upward.

Only use salt specifically designed for

use in dishwashers.

All other types of salt not specifically

designed for use in dishwasher,

especially table salt, will damage the

water softener.

Only fill with salt just before starting one of the

complete washing programmes (not the Rinse and Hold

programme). This will prevent any grains of salt or salty

water, which may have been spilled, remaining on the

bottom of the machine for any period of time, which

may cause corrosion.

To fill:

1. To fill with salt, unscrew the cap of the salt

container.

2. Pour about 1 litre of water inside the container,

or until it is full (this is necessary only before

filling with salt for the first time).

3. Then using the funnel provided, pour in the salt

until the container is full (approx. 1.5 - 1.8 kg).

Do not worry if water over flows from the unit

when filling with salt, this is quite normal.

4. Replace the cap making sure that there is no

trace of salt on the screw thread or on the

gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the "Salt refill indicator

light" on the control panel which comes on when the salt

has finished.

The "Salt refill indicator light" on the

control panel can remain illuminated

for 2-6 hours after the salt has been

replenished, assuming the dishwasher

remains switched on. If you are using

salts that take longer to dissolve then

this can take longer. The function of

the machine is not affected.

SR07

PFS06UK