Zanussi ZT 6910 지침서 - 페이지 8

{카테고리_이름} Zanussi ZT 6910에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZT 6910 28 페이지. Zanussi dishwasher instruction book
Zanussi ZT 6910에 대해서도 마찬가지입니다: 지침서 (28 페이지)

페이지 인쇄

1. Something Not Working

Rinse aid

Rinse aid is automatically added during the last

rinse, ensuring thorough rinsing, and spot and

streak free drying. The dispenser, which is

positioned inside the door, holds about 110 ml of

rinse aid, which is sufficient for 16 - 40 dishwashing

programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A)

anticlockwise.

2. Add the rinse aid until the container is completely

full. The indicator (B) will be completely dark.

3. Top up the rinse aid when the rinse aid indicator

light on the control panel illuminates.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid

compartment. Clean up any rinse aid spilt during

filling with an absorbent cloth to avoid excess

foaming during the next wash.

Adjusting the dose

According to the finish and drying results obtained,

adjust the dose of rinse aid by means of the 6

position selector (C) (position 1 minimum dosage,

position 6 maximum dosage).

Start from position 3.

Gradually increase the dose if there are drops of

water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the

dishes.

All manuals and user guides at all-guides.com

BR01

BR03

BR02