Zanussi PXL59 지침 책자 - 페이지 11

{카테고리_이름} Zanussi PXL59에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi PXL59 11 페이지. Gas hob pwl59; pxl59

Commissioning

When the hob has been fully installed it will be necessary

to check the minimum flame setting. To do this, follow

the procedure below.

Turn the gas tap to the MAX position and ignite.

Set the gas tap to the MIN flame position then turn

the control knob from MIN to MAX several times. If

the flame is unstable or is extinguished follow the

procedure below.

Procedure:

Re-ignite the burner and set to MIN.

Remove the control knob, use a thin bladed

screwdriver to turn the adjustment screw. Check

the flame is steady and does not extinguish when

the knob is turned from MIN to MAX. Repeat this

procedure for all burners.

Technical Maintenance

Check at regular intervals the condition and serviceability

of the gas connection hose and pressure regulator, if any

is fitted; in case of malfunction, do not repair but replace

the whole faulty part.

To ensure a smooth and safe operation, it is necessary

to periodically grease the gas taps.

by-pass

screw