Zanussi ZBE 603 지침 책자 - 페이지 18

{카테고리_이름} Zanussi ZBE 603에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBE 603 24 페이지. Electric hob

Installation

The hob must be installed

according to the instructions

supplied.

The hob must be installed by

qualified personnel

qualified personnel to the

qualified personnel

relevant British Standards.

Please, ensure that, once the hob

is installed, it is easily accessible

for the engineer in the event of a

breakdown.

When the hob is first installed

Once the hob has been installed,

it is important to remove any

protective materials, which were

put on in the factory.

The manufacturer will not accept

liability, should the above

instructions or any of the other

safety instructions incorporated in

this book be ignored.

These cooktops are designed for

fitting on modular kitchen cabinets

having a depth of between 550 and 600

mm and suitable characteristics.

Fitting the Hob into the

worktop

Carry out the building in of the hob

as follows:

• place the seals supplied with the

hob on the front edge of the cut

out. Then, place them at 11 mm

from the side edges and at 10 mm

from the rear edge, as shown in

the diagram, taking care that the

seals meet without overlapping.

• Place the hob in the cut out,

taking care that it is centred.

Fig. 8