Zanussi ZEE6140FXA 사용자 설명서 - 페이지 5
{카테고리_이름} Zanussi ZEE6140FXA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZEE6140FXA 12 페이지.
Zanussi ZEE6140FXA에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)
페이지 인쇄
Product description
Cooking surface layout
1
145 mm
180 mm
1
Control knob
Symbol
0
Off position
1 - 6
Heat settings
Daily use
WARNING!
Refer to Safety chapters.
Before first use
Put cookware containing water on each cooking
zone, set the maximum position and operate the
hob for 10 min. This is to burn off the residue in
the appliance. After that, operate the hob at
minimum position for 20 min. During this period,
an odour and smoke can occur. This is normal.
Make sure that the airflow is sufficient.
Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
www.zanussi.com
1
180 mm
2
145 mm
3
1
Function
Cooking zone
1
Control knobs
2
Power indicator
3
Residual heat
WARNING!
There is a risk of burns from residual
heat.
than usual plates. The red dots are painted on
the plates. They can deteriorate during use and
even disappear completely after a period of
time. It does not have an effect on the
performance of the hob.
The heat setting
To set or change the heat setting turn the knob
to the correct heat setting. To deactivate turn
the knob to off position.
Power indicator activates when one or more
cooking zones are activated. When you
deactivate the cooking zones the indicator
deactivates.
5