Zanussi ZGF 681 지침 책자 - 페이지 5

{카테고리_이름} Zanussi ZGF 681에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 681 12 페이지. Zanussi cooktop user manual
Zanussi ZGF 681에 대해서도 마찬가지입니다: 지침 책자 (12 페이지)

페이지 인쇄

Maintenance and Cleaning

Before any maintenance or cleaning can be carried

out, you must DISCONNECT the hob from the

electricity supply.

The hob is best cleaned whilst it is still warm, as spillage

can be removed more easily than if it is left to cool.

The Hob Top

Regularly wipe over the hob top using a soft cloth well

wrung out in warm water to which a little washing up

liquid has been added. Avoid the use of the following:

- household detergent and bleaches;

- impregnated pads unsuitable for non-stick saucepans;

- steel wool pads;

- bath/sink stain removers.

Should the hob top become heavily soiled, it is

recommended that a cleaning product such as Hob Brite

or Bar Keepers Friend is used.

Pan Supports

To keep the pan supports in the correct position, they

are hooked into hinges at the back of the hob.

Model ZGF 681 IX: The pan supports can be lifted

for easier cleaning, as shown in Fig. 2.

Model ZGF 681 ICX: The hob has two cast iron

pan supports.

Take care when removing them. They are

heavy and could damage the hob or your

kitchen furniture if you let them fall.

Never turn the pan supports on the hinges, this

could damage them.

To remove the pan supports completely, proceed

as shown in Fig. 3.

Wash the pan supports using hot soapy water. If

necessary, a paste cleaner or a soap impregnated steel

wool pad can be used with caution.

After cleaning, be sure to wipe dry with a soft cloth.

The Burners

The burner caps and crowns (Fig. 1) can be removed for

cleaning.

Wash the burner caps and crowns using hot soapy water,

and remove marks with a mild paste cleaner. A well

moistened soap impregnated steel wool pad can be used

with caution, if the marks are particularly difficult to

remove. After cleaning, be sure to wipe dry with a soft

cloth.

Ignition candle

The electric ignition is obtained through a ceramic

"candle" and a metal electrode (Fig. 1 - letter C). Keep

these components well clean, to avoid difficult lighting,

and check that the burner crown holes are not

obstructed.

All manuals and user guides at all-guides.com

YES

FO 2237

Fig. 2

Fig. 3