Zanussi ZGF 692 CT 지침 책자 - 페이지 22
{카테고리_이름} Zanussi ZGF 692 CT에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 692 CT 32 페이지. Zanussi gas hob instruction manual
페이지 인쇄3) Connect the brown (live) wire to the terminal in the plug which
is marked with the letter 'L' or coloured red.
Upon completion there must be no cut, or stray strands of wire present
and the cord clamp must be secure over the outer sheath.
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
safety (shock) hazard. Ensure that the cut off plug is disposed
of safely
of safely
of safely. . . . .
of safely
of safely
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
The replacement of electric cable must be carried out ex-
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
clusively by the service force centre or by personnel with
similar competencies, in accordance with the current regu-
similar competencies, in accordance with the current regu-
similar competencies, in accordance with the current regu-
similar competencies, in accordance with the current regu-
similar competencies, in accordance with the current regu-
lations.
lations.
lations.
lations.
lations.
Permanent Connection
Permanent Connection
Permanent Connection
Permanent Connection
Permanent Connection
In the case of a permanent connection, it is necessary that you install a
double pole switch between the hob and the electricity supply (mains),
with a minimum gap of 3 mm between the switch contacts and of a type
suitable for the required load in compliance with the current electric
regulations.
The switch must not break the yellow and green earth cable at any point.
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
Ensure that the hob supply cord does not come into contact
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
with surfaces with temperatures higher than 50 deg. C.
Wiring diagram
Wiring diagram
Wiring diagram
Wiring diagram
Wiring diagram
1 1 1 1 1
1. TAPS IGNITOR SWITCHES
2. IGNITOR UNIT
22
2 2 2 2 2