Zanussi ZGF 7521 지침 책자 - 페이지 8
{카테고리_이름} Zanussi ZGF 7521에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 7521 32 페이지. Gas hob
Operation
Lighting the burners
Lighting the burners
Lighting the burners
Lighting the burners
Lighting the burners
For easier lighting,
For easier lighting,
For easier lighting,
For easier lighting,
For easier lighting,
s u p p o r t .
s u p p o r t .
s u p p o r t .
s u p p o r t .
s u p p o r t .
)
To light a burner:
turn the relevant knob anti-clockwise to maximum position (
z
push it down to ignite the burner.
Then, check that the flame is regular adjust it as required.
z
If the burner does not ignite, turn the control knob to zero, and try again.
If you cannot light the flame even after
severalattempts, check the "cap" (Fig. 1
lett. A A A A A ) and the"crown" (Fig. 1 lett. B B B B B ) are in
the correct position.
When switching on the mains, after
installation or a power cut, it is quite
normal for the spark generator to be
activated automatically.
In the absence of electricity
In the absence of electricity
In the absence of electricity, ignition
In the absence of electricity
In the absence of electricity
can occur without the electrical device; in
this case, approach the burner with a
flame, push the relevant knob down and
turn it anti-clockwise until it reaches the
maximum position.
If the control knobs become difficult to
turn, please contact your local Service
Force Centre.
8
proceed before putting a pan on the pan
proceed before putting a pan on the pan
proceed before putting a pan on the pan
proceed before putting a pan on the pan
proceed before putting a pan on the pan
A - Burner cap
B - Burner crown
C - Ignition electrode
), then
Fig. 1