Zanussi ZGF 783 지침 책자 - 페이지 9

{카테고리_이름} Zanussi ZGF 783에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 783 12 페이지. Gas hob

Building In

A = Auxiliary burner

R = Rapid Burner

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in Fig. 9.

FITTING THE LID

We recommend the lid hinge block are fitted before

installing the hob into the worktop.

To install the lid onto the hob, proceed as follows:

a. Remove the right and left hand grid blocks fitted to

the back of the hob, by unscrewing the relevant

screws (Fig. 10)

b. Fit the lid hinge blocks onto the hob, using the

original screws, ensuring that the relevant shims are

fitted between the hinge blocks and the hob (Fig. 10);

c. Fit the left hand lid hinge (marked S) into the hinge

block (Fig.11);

d. Carry out the same operation with the right hand lid

hinge (marked D).

ADJUSTING THE LID BALANCE

To adjust the lid balance, turn clockwise or anti-

clockwise the central screw of the right- and left-hand

hinges (Fig. 12).

SR = Semirapid burner

UR = Double crown burner

Fig. 9

FO 2035

FO 2036

FO 2037

Fig. 11

Fig. 10

Fig. 12