Zanussi ZGF 786 지침 책자 - 페이지 11
{카테고리_이름} Zanussi ZGF 786에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 786 11 페이지.
Possibilities for
insertion
Kitchen unit with door
Proper arrangements must be
taken in designing the forniture
unit, in order to avoid any contact
with the bottom of the hob which
can be heated when it is operated.
The recommended solution is
shown in Fig. 13.
The panel fitted under the hob
should be easily removable to
allow an easy access if a technical
assistance intervention is needed.
Kitchen unit with oven
The hob recess dimensions must
comply the indication given in Figs.
14 and 17 and must be provided
with brackets to allow a continuous
supply of air.
To avoid overhating, the building in
should be carried out as shown in
Figs. 15 and 16.
The hob's electric connection and
the oven's one must be carried out
separately, both for safety reasons
and to allow the oven to be easily
taken off the unit.
Hanging forniture units or hoods
must be placed at 650 mm.
minimum from the hob (Fig. 18).
Fig. 17
550 min.
FO 0198
Fig. 13
FO 2044
a) Removable panel
b) Space possibly useful for
connections
Fig. 15
FO 2041
Fig. 18
FO 2040
Fig. 14
FO 2043
Fig. 16
FO 2042
11