Zanussi ZGF 983 ITXC 지침 책자 - 페이지 9

{카테고리_이름} Zanussi ZGF 983 ITXC에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 983 ITXC 14 페이지.

7. Building In

ZGF 983 ITX

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in Fig. 9.

A = Auxiliary burner

R = Rapid Burner

FITTING THE LID

We recommend the lid hinge block are fitted

before installing the hob into the worktop.

To install the lid onto the hob, proceed as follows:

a. Remove the right and left hand grid blocks fitted to the

back of the hob, by unscrewing the relevant screws

(Fig. 10)

b. Fit the lid hinge blocks onto the hob, using the original

screws, ensuring that the relevant shims are fitted

between the hinge blocks and the hob (Fig. 10);

c. Fit the left hand lid hinge (marked S) into the hinge block

(Fig.11);

d. Carry out the same operation with the right hand lid

hinge (marked D).

ADJUSTING THE LID BALANCE

To adjust the lid balance, turn clockwise or anti-clockwise

the central screw of the right- and left-hand hinges (Fig.

12).

SR = Semirapid burner

UR = Triple Crown Burner

Fig. 9

ZGF 983 ITXC

Fig. 11

Fig. 10

Fig. 12