Zanussi ZGG 646 사용 설명서 - 페이지 19

{카테고리_이름} Zanussi ZGG 646에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGG 646 23 페이지.
Zanussi ZGG 646에 대해서도 마찬가지입니다: 지침 책자 (9 페이지)

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive

seal must be fitted to the underside outside edge

of the hob. It is essential that no gaps are left in this

seal in order to prevent spillage near the hob

seeping into the cabinet below.

1) Remove the pan supports, the burners caps

and crowns and turn the hob upside down,

taking care the ignition candles are not

damaged in this operation.

2) Place the relevant sealing all around the glass

top edge, taking care that the sealings meet

without overlapping (Fig. 8).

3) Place the hob in the cut out, taking care of its

centring.

4) Fix the hob with the relevant screws(Fig. 9).

A) Sealing gasket

Fig. 8

Fig. 9