Zanussi ZGG 742 E 지침 책자 - 페이지 9

{카테고리_이름} Zanussi ZGG 742 E에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGG 742 E 40 페이지. Electronic gas hob

Zanussi ZGG 742 E 지침 책자
- If touch control
burner automatically lights at medium
flame level (three flame level indicators
illuminate).
4. To adjust the burner flame level, use the
Increasing
Control.
The residual heat indicator
immediately after the burner is lit.
This means that the cooking zone is
getting hot: the indicator remains on until
the pan support and the burner have
cooled down.
How to turn off a
1. To turn off a burner press the relevant
Burner Ignition Touch Control
flame level indicators go off.
The residual heat indicator remains on
until the pan support and the burner have
cooled down.
In case of ignition
The hob ignition device generates a series
of small sparks for about 6 seconds.
If the flame does not light during this period,
the gas flow to the burner is interrupted.
After 3 seconds, the ignition device
automatically repeats the ignition procedure
for another 6 seconds.
After three failed ignition attempts, a safety
device is set on the burner. The flame level
indicators flash.
Caution! When the safety device is
set on a burner, the burner controls
cannot be operated for about 60
seconds.
is selected, the
or
Decreasing
lights up
burner
failure
Touch
. All the
9