Zanussi ZGL 62 ITX 지침 책자 - 페이지 7

{카테고리_이름} Zanussi ZGL 62 ITX에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGL 62 ITX 20 페이지. Gas hob

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting your local Zanussi Service

Force Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or

installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM

There is no spark when lighting the gas

The gas ring burns unevenly

SOLUTION

Check that the unit is plugged in and the electrical

supply is switched on

Check that the RCCB has not tripped (if fitted)

Check the mains fuse has not blown

Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

Check the main jet is not blocked and the burner

crown is clear of food particles.

Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.