Zanussi ZGS 64IX 사용자 설명서 - 페이지 6

{카테고리_이름} Zanussi ZGS 64IX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGS 64IX 24 페이지.

Operation

Before using the appliance re-

move all packaging, including

the advertising labels and any

protective film.

Hob burner control knobs

The symbols on the knobs mean:

= no gas supply

= maximum gas supply

= minimum gas supply

For easier lighting, proceed before

putting a pan on the pan support.

Lighting the burners

Push the relevant knob down and

turn it anti-clockwise until it reaches

the "maximum" position.

Then, check the flame is regular

and adjust it as required.

If you cannot light the flame even

after several attempts, check the "cap"

and "crown" (see figure 1 - lett. A A A A A , B B B B B )

are in the correct position.

When switching on the mains, after

installation or a power cut, it is qui-

te normal for the spark generator to

be activated automatically.

In the absence of electricity, igni-

tion can occur without the

electrical device; in this case

approach the burner with a

flame, push the relevant knob

down and turn it anti-clockwise

until it reaches the "maximum"

position.

Do not keep the control knob

pressed for more than 15 se-

conds.

A - Burner cap

B - Burner crown

C - Ignition candle

Fig. 1