Zanussi ZGS 782 ICT 지침 책자 - 페이지 20

{카테고리_이름} Zanussi ZGS 782 ICT에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGS 782 ICT 32 페이지. Electrolux gas hob instruction booklet
Zanussi ZGS 782 ICT에 대해서도 마찬가지입니다: 지침 책자 (32 페이지)

페이지 인쇄

Fitting the Hob into the Worktop

Carry out the building in of the hob as

follows:

• place the seals supplied with the

hob on the front edge of the cut

out. Then, place them at 86 mm

from the side edges and at 10 mm

from the rear edge, as shown in

the diagram, taking care that the

seals meet without overlapping.

• place the hob in the cut out,

taking care that it is centred;

• fix the hob with the relevant fixing

clamps and screws, as shown in

the diagram. When the screws

have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal