Zanussi ZKT 630 D 지침서 - 페이지 16

{카테고리_이름} Zanussi ZKT 630 D에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 630 D 22 페이지. Glass ceramic induction hob

페이지 인쇄

Problem Dirt

Residues from Food that Has Boiled

Over

First soften these using a

wet cloth and then remove

residues using a glass or

razor blade scraper.

Danger! Take care not hurt

yourself!

Then clean the cooking

surface with the cleaners identified above.

Burnt-in sugar, melted

plastic you must remove

immediately – while it is

still warm (not hot) – with

a glass scraper otherwise

damage can be incurred.

Then clean the cooking

surface normally.

You can prevent damages

by sugar or sugar-contai-

ning foods by caring for the cooking surface with

„Collo-Profi" or „Cerafix".

What to do if ... ...

... the letter f in the digital display

of the induction cooking zones flas-

hes?

Check whether:

– The pan is on the right cooking zone.

– The diameter of the pan base is too small for the

cooking zone!

– The pan is suitable for induction cooking!

Spots

Limescale stains, mother-

of-pearl-like shiny stains,

metallic iridiscent disco-

lourations, pan abrasions

that have formed during

cooking can be removed

best while the cooking

zones are still warm. Use

one of the cleaners men-

tioned above. If neces-

sary repeat the cleaning process.

Danger!

Do not put vinegar, lem-

ons or scale removers on

the hob frame, they will

make the surface matt.

Grains of sand that have

fallen on the cooking sur-

face can cause scratches

when the pans are slid

around. Ensure, therefore, that no grains of sand

remain on the cooking surface.

Abraded decor

In time the decor is abra-

ded by the use of aggres-

sive

cleaners

and

scouring pan bases and

dark stains develop.

You can obtain suitable cleaning and caring

agents as well as glass scrapers from the

Zanussi customer service.

... j appears in the digital display?

– Check whether the cooking zone could be over-

heated.

For these checks turn the cooking zone off and

let it cool off.

Try to switch the cooking zone on again after a

few minutes with a suitable pan on it.

– The automatic switch-off for the cooking zone

has responded. You can reactivate the cooking

zone by turning it quickly off and then on again.