Zanussi ZKT 641 H 설치 및 운영 지침 매뉴얼 - 페이지 4

{카테고리_이름} Zanussi ZKT 641 H에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 641 H 32 페이지. Zanussi installation and operating instructions ceramic hob zkt 641 h
Zanussi ZKT 641 H에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (28 페이지)

페이지 인쇄

Operating Instructions

Safety instructions

Please comply with these instructions. If you do not, any damage resulting

is not covered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose

physical, sensory or mental capabilities or lack of experience and knowl-

edge prevents them from using the appliance safely without supervision

or instruction by a responsible person to ensure that they can use the ap-

pliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and fry-

ing of food.

• The appliance must not be used as a work surface or as a storage sur-

face.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or

fusible objects (e.g. plastic film, plastic, aluminium) on or near the appli-

ance.

Child safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appliance

on, we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered

service engineers, or competent persons.

• Built-in appliances may only be used after they have been built in to suita-

ble built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic

(cracks, scratches or splits), the appliance must be switched off and dis-

connected from the electrical supply to prevent the possibility of an elec-

tric shock.

• Repairs to the appliance must only be carried out by trained registered

service engineers.