Zanussi ZKT 662 HX 사용 설명서 - 페이지 18
{카테고리_이름} Zanussi ZKT 662 HX에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 662 HX 25 페이지. Ceramic built-in hob
Zanussi ZKT 662 HX에 대해서도 마찬가지입니다: 사용 설명서 (26 페이지)
페이지 인쇄
The right cooking utensils
Energy consumption
To save energy, you should . . .
--
use only cooking and frying utensils with smooth,
flat bottoms.
--
place pots and pans in position before switching on
the cooking zone.
--
Wherever possible, cover pots and pans with a lid.
--
switch off the cooking zone a few minutes before
the end of the cooking time, in order to make use
of the residual heat.
--
use the residual heat of the cooking zones for kee-
ping food warm or for melting.
--
Position pots and pans centrally on the cooking zo-
nes.
Saucepans and frying
pans
Saucepans and frying pans should not be smaller than
the cooking zone, and preferably not more than
10--15 mm larger than the diameter of the cooking
zone.
Always use cooking and frying utensils with smooth,
flat bottoms.
The bottoms should always be clean and dry. Cook
with a lid in place.
Check that the bottoms of utensils are smooth and un-
damaged; bottoms with burrs and sharp edges will
scratch the ceramic glass surface.
Scratches can also be caused by grains of sand (e.g.
originating from the previous washing of vegetables),
drawn over the cooking surface with the pan, or by
burrs and the rims of pan bottoms.
To avoid scratching or damaging the ceramic cooking
surface, pots and pans should be moved on the plate
by lifting them, and not by sliding.
Utensils with aluminium and copper bottoms can leave
behind metallic discolorations which can only be remo-
ved with difficulty or sometimes not at all.
When cold, pan bases normally curve slightly inwards
by approx. 0.1 -- 0.5 mm (are concave). In no case
should they curve outwards (be convex).
Follow any guidelines provided by the saucepan ma-
nufacturer. Ensure they are recommended for use on
ceramic hobs.
Check that the appliance is switched off after
use.
161