Zanussi ZKT 662 LN 사용 설명서 - 페이지 8

{카테고리_이름} Zanussi ZKT 662 LN에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 662 LN 25 페이지. Ceramic built-in hob

Residual heat indicator

An "H" will light up in the power level indicator if the

temperature of the corresponding cooking zone sur-

face above 60°C. When the cooking zone has been

switched off, the lamp remains on until temperature

falls below 60°C.

Pay attention when a pan/pot is left on the coo-

king zone that the residual heat indicator can

switch off though is the cooking zone still hot

from the pan with hot contents.

The touch controls must be pressed for at least

1 second to be activated, which will be indicated

by an acoustic signal.

Switching the

appliance on

1. Press the hob ON/OFF control (1) for at least 1 se-

cond.

A horizontal line appears in each power level indicator

(3), and the dot (13) flashes.

The next input must take place within the

next 10 seconds, otherwise the hob will

switch off again.

Switching on the

cooking zones

Having switched on the appliance with the hob ON/

OFF control (1), you can now switch on the various

cooking zones within the next 10 seconds.

1. Press the cooking zone control (2) for the required

cooking zone.

«0» lights up on the corresponding power level in-

dicator. At the same time, dot (13) lights up to indi-

cate which cooking zone is active.

2. Select a power level (1--9) using the decrease con-

trols (5/4).

If you selct the power level using the increase

control, the boost facility will be activated (see

pages 66).

The increase/decrease controls (5/4) are

equipped with a repeat function. If one of the

keys is continually pressed, the power level will

be increased.

Only one cooking zone control (2) can be ac-

tive at a time, that is, only one dot (13) can be

lit up.

151