Zanussi ZVT 64 X 사용자 정보 - 페이지 11
{카테고리_이름} Zanussi ZVT 64 X에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZVT 64 X 20 페이지. Ceramic hob
Zanussi ZVT 64 X에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (28 페이지)
페이지 인쇄
Type of dirt
sugar, food containing sugar
plastics, tin foil
limescale and water rings
fat splashes
shiny metallic discolouration
*Scrapers and cleaners for glass ceramic and stainless
steel can be purchased in specialist shops, supermarkets,
the parts department of your local Service Force Centre or
from www.shop.electrolux.co.uk
3
Remove stubborn residues with a cleaner
for glass ceramic or stainless steel.
What to do if ...
Problem
The cooking zones will not switch on
or are not functioning
Acoustic signal sounds when appli-
ance is switched off
The residual heat indicator is not
displaying anything
Acoustic signal sounds and appli-
ance switches itself on and then off
again; after 5 seconds another
acoustic signal sounds
immedi-
when the appliance has
ately
cooled down
yes
yes
---
---
---
3
Possible cause
More than 10 seconds have passed
since the appliance was switched on
The child safety device is switched
on
Several sensor fields were touched
at the same time
Automatic switch off has been trig-
gered
The control panel is wholly or partly
covered by objects.
The cooking zone was only on for a
short time and is therefore not hot
The On/Off sensor field has been
covered up, e.g. by a cloth
Remove
---
---
yes
cleaner for glass ceramic
yes
yes
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not how-
ever affect the functioning of the appliance.
Switch the appliance on again.
Deactivate the child safety device
(See the section "Child safety de-
vice")
Only touch one sensor field
Remove any objects (pan, cloths,
etc.) that are lying on the control
panel. Switch the appliance on
again
Remove objects.
If the cooking zone is supposed to
be hot, call your local Service Force
Centre.
Do not place any objects on the con-
trol panel
using
a scraper*
or stainless steel*
Remedy
11