Zanussi ZVT64X 사용자 설명서 - 페이지 14
{카테고리_이름} Zanussi ZVT64X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZVT64X 36 페이지. Ceramic glass hob
Zanussi ZVT64X에 대해서도 마찬가지입니다: 사양 (7 페이지), 사용자 설명서 (44 페이지)
페이지 인쇄
Display
Residual heat indicator
Warning!
Risk of burns from residual heat!
Operating the appliance
On and Off
Touch
for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch
to increase the heat setting. Touch
crease the heat setting. The display shows the heat set-
ting. Touch
and
at the same time to switch off the
cooking zone.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device
• Start the hob with
. Do not set the heat settings .
• Touch
of the two front cooking zones at the same
time for 4 seconds. The symbol
off the appliance.
Helpful hints and tips
Cookware
• The bottom of the cookware must be as thick and
flat as possible.
14
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
The automatic switch off is active
.
-
6 hours
5 hours
to de-
comes on. Switch
Description
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth,
etc.) for longer than 10 seconds. Remove the object or
clean the control panel.
• you do not stop a cooking zone or change the heat set-
ting after some time. See the table.
-
4 hours
Switching off the child safety device
• Start the hob with
• Touch
of the two front cooking zones at the same
time for 4 seconds. The symbol
off the appliance.
Overriding the child safety device for one cooking session
• Start the hob with
• Touch
of the two front cooking zones at the same
time for 4 seconds. The symbol
heat setting in less than 10 seconds. You can operate
the hob. When you stop the hob with
safety device operates again.
• Cookware made of enamelled steel and with alu-
minium or copper bottoms can cause discolora-
tion on glass ceramic surface.
comes on.
-
1.5 hours
. Do not set the heat settings .
comes on. Switch
. The symbol
comes on.
comes on. Set the
, the child