Zanussi ZBF22456S1 사용자 설명서 - 페이지 10

{카테고리_이름} Zanussi ZBF22456S1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBF22456S1 17 페이지.

페이지 인쇄

Problem

The temperature in the appli-

ance is too low/too high.

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

CLOSING THE DOOR

1. Clean the door gaskets.

INSTALLATION

POSITIONING

Install the appliance in a dry, well ventilated indoors

where the ambient temperature corresponds to the

climate class indicated on the rating plate of the

appliance.

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Some functional problems might occur

for some types of models when

operating outside of that range. The

correct operation can only be

guaranteed within the specified

temperature range. If you have any

doubts regarding where to install the

appliance, please turn to the vendor,

to our customer service or to the

nearest Authorised Service Centre.

Possible cause

The temperature regulator is

not set correctly.

The food products' tempera-

ture is too high.

The door has been opened

often.

There is no cold air circula-

tion in the appliance.

2. If necessary, adjust the door. Refer to assembly

instructions.

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

ELECTRICAL CONNECTION

The wires in the mains lead are coloured in

accordance with the following code:

Solution

Set a higher/lower temperature.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Open the door only if necessary.

Make sure that there is cold air

circulation in the appliance.

CAUTION! Any electrical work

required to install this appliance

should be carried out by a qualified

electrician or competent person.

WARNING! This appliance must be

earthed.

The manufacturer declines any liability

should these safety measures not be

observed.