Zanussi ZCAN20FW1 사용자 설명서 - 페이지 7

{카테고리_이름} Zanussi ZCAN20FW1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCAN20FW1 21 페이지.

•

A - green and yellow: Earth

•

C - brown: Live

•

D - blue: Neutral

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

1. Connect the wire coloured green and yellow to

the terminal marked either with the letter "E" or

by the earth symbol

yellow.

2. Connect the wire coloured blue to the terminal

either marked with the letter "N" or coloured

black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or coloured

red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure over

the outer sheath.

Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse (B).

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

GENERAL OVERVIEW

or coloured green and

HANDLE INSTALLATION GUIDE

1. Take out the handle base and 2 screws from

the plastic bag.

2. Place the handle in position according to the

picture. Use Phillips screwdriver to fix the

handle base to the lid.

Open and close the lid several times to make sure

the handle is properly fastened.