Zanussi ZF 134 UN 지침 책자 - 페이지 7

{카테고리_이름} Zanussi ZF 134 UN에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZF 134 UN 13 페이지. Freezer zf 134 un

Lay the panel face down (Fig. 6). Position the top

bracket on the panel, making sure that there is an

equal distance between it and the sides and that its

distance from the top edge is equal to distance (A)

less 1 cm.

Secure the bracket with the screws supplied.

Take care not to damage the front face of the panel

whilst working.

Insert the adjusting pins (B-Fig. 7) into their locations

in the door and screw them in.

Hook the decorative panel onto the top part of the

door, inserting the pins (B) (on the door) into the

elongated holes (1) (in the top bracket ﬁtted to the

panel) (Fig. 8).

Insert the securing screws (C) through elongated

holes (2) and ﬁx the panel without tightening the

screws (Fig. 8).

Once the top of the panel has been correctly

positioned, ﬁx it through the holes in the bottom

bracket, without tightening the screws (Fig. 9).

D468

D532

D533

D471

Fig. 6

-1cm

Fig. 7

Fig. 8

Fig. 9