Zanussi ZFC727WAP 사용자 설명서 - 페이지 14

{카테고리_이름} Zanussi ZFC727WAP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFC727WAP 44 페이지.

페이지 인쇄

• Make sure that the mains plug is accessible

after the installation of the appliance.

Service

• Any electrical work required to do the servic-

ing of the appliance should be carried out by

a qualified electrician or competent person.

• This product must be serviced by an author-

ized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in ei-

Operation

Switching on

Insert the plug into the wall socket.

The Pilot light will light up.

Turn the Temperature regulator clockwise.

Important! If the temperature inside the

appliance is too high the Alarm light will light up.

Switching off

To turn off the appliance, turn the Temperature

regulator to the OFF position.

Temperature regulation

The temperature is automatically regulated.

To operate the appliance, proceed as follows:

• turn the Temperature regulator towards

obtain the minimum coldness.

• turn the Temperature regulator towards

obtain the maximum coldness.

ther its refrigerant circuit or insulation materials.

The appliance shall not be discarded together

with the urban refuse and rubbish. The insula-

tion foam contains flammable gases: the appli-

ance shall be disposed according to the appli-

cable regulations to obtain from your local au-

thorities. Avoid damaging the cooling unit, espe-

cially at the rear near the heat exchanger. The

materials used on this appliance marked by the

symbol

are recyclable.

A medium setting is generally the most

suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

appliance depends on:

• room temperature

• how often the lid is opened

• the quantity of food stored

• the location of the appliance.