Zanussi ZFR 67 지침 책자 - 페이지 17

{카테고리_이름} Zanussi ZFR 67에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFR 67 18 페이지. Zanussi instruction freezer zfr 67

Door reversal

1. Disconnect from the electricity supply.

2. Remove all loose items, including food, store food

in a cool place.

3. Gently lay the fridge/freezer on its back with the

top held away from the floor by 5-8 cm (2-3

inches) of packing;

4. Remove the feet (3)

5. Remove bottom hinge (1).

6. Slide out the door from pin (G), unscrew the

latter and then screw it down into the hinge

provided on the opposite side, after having

removed the small plugs which should then be

fitted on the opposite side.

7. Refit the door and bottom hinge (1) on the

opposite side.

8. Refit the feet (3) on the opposite side.

9. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs contained

in the documentation pack.

Important

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.

D715 PIED/M

D162/1