Zanussi ZFR 67 지침 책자 - 페이지 9

{카테고리_이름} Zanussi ZFR 67에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFR 67 18 페이지. Zanussi instruction freezer zfr 67

SOMETHING NOT WORKING

If the appliance is not working correctly, please carry out the following checks before contacting your local

Zanussi Service Force Centre

Symptom

No power to the appliance

The temperature in the freezer is too high

The freezer door will not open

The compressor runs continously

Excessive frost and ice has built up

Noise

If after the above checks your appliance still does not operate correctly, contact your local Zanussi Service

Force Centre.

In-guarantee customers should ensure that the above checks have been made, as the engineer will

make a charge if the fault is not a mechanical or electrical breakdown.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

Solution

Check there is power at the socket.

Check there is not a power cut by checking the

household lights.

Check the fuse has not blown.

Check the temperature in the freezer is turned to the

correct setting relative to ambient conditions.

Check the ambient temperature is within the

applianceÕs operating limits of 10¡C to 32¡C.

Relocate the appliance if necessary.

Has door just been opened? If so leave for a few

minutes to allow the air pressure to equalise.

Adjust the thermostat control knob to give correct

temperature control. See ÒSetting the temperatureÓ.

Check that the door is closed.

Large quantities of food have recently been placed in

the cabinet and/or door is frequently opened.

Check that air ventilation is not obstructed.

Ensure the door is not left open.

Check that nothing is preventing the door from

closing.

Is the door gasket intact and clean.

Has advised periodic defrosting been carried out.

Refer to normal operating sounds.