Zanussi ZFT 710FW 지침서 - 페이지 7

{카테고리_이름} Zanussi ZFT 710FW에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFT 710FW 16 페이지. Freezer zft 710fw

페이지 인쇄

1. Something Not Working

Switches and indicators

On/off indicator

Thermostat and on/off switch

Quick freeze indicator

Acoustic signal stop and quick freeze switch

Alarm indicator

Basket Storage

Frozen food should be stored in the two lower baskets

and the top compartment used for storage or fast freez-

ing of fresh food.

Operation and use

Installation

Insert the plug into the socket. In order to switch on the

product, turn the thermostat (B) to a temperature lower

than << -16 °C >>. The green indicator will light up and the

red indicator will blink. The lighting up of the on/off indi-

cator (A) means that the product is switched on. The

blinking of the red indicator means an improper tempera-

ture in the freezing compartment. In addition, an intermit-

tent sound can be heard, which can be stopped by press-

ing button (D) once. You can switch off the freezer by

turning the thermostat (B) in position <<

Adjusting the temperature

The internal temperature of the freezer is regulated elec-

tronically through five temperature positions and a switch-

off <<

>> setting.

Position << -16 °C>> indicates the highest (least cold)

temperature, while position << -24 °C>> is for the lowest

(coldest) temperature. Rotate the thermostat in the

desired position.

In general, it is best to set the thermostat to << -18°C >>

but, for the purpose of temperature setting, you should

also consider

the temperature of the room where the product is

installed,

the frequency of door openings,

the volume of food to be stored in the product,

the location of the product.

Therefore, you should consider all factors and you may

have to do some testing to find the best temperature. If

you want a lower temperature, turn the thermostat into a

position of higher number or, vice versa, if you need a

higher temperature, you should set a position of lower

number. Please allow 24 hours for the freezer tempera-

ture to stabilize between two adjustments.

Alarm (red) indicator

The temperature alarm indicator (E) will light up when the

internal temperature of the freezer increases to a level

(above -12°C) where the long-term conservation of the

foods in not ensured. Please note that, when switching on

the freezer for the first time, the alarm indicator will blink

green

until the internal temperature has reached a level required

for the safe conservation of frozen food.

Temperature problem:

yellow

Under normal operating conditions, the internal tempera-

ture of the freezer will ensure the long-term conservation

red

of the stored food. When such temperature rises above a

certain level (-12°C), it will trigger an acoustic and light

alarm. The light alarm is a blink red light (E), while the

acoustic alarm is an intermittent sound. You can stop the

acoustic alarm by pressing switch (D) once.

Freezing

Prepare the various foods properly and then freeze them

always in the freezing compartment.

For using the quick freeze function, press the quick freeze

on/off switch (D) for 2-3 seconds; in the case of small

and great food volumes you should do it approx. 4 and 24

hours, respectively, before you want to freeze the fresh

food. The yellow indicator (C) will light up. The compres-

sor will operate continuously until the product reaches the

freezing temperature.

Once the food is completely frozen (it may take up to 24

hours) you can manually switch off the quick freeze func-

tion by pressing the switch (D) for 2-3 seconds. If not

>>.

switched off manually, the quick freeze function will be

automatically switched off 48 hours later. The yellow indi-

cator (C) will also go out.