Zanussi ZFT11100WA 사용자 설명서 - 페이지 11

{카테고리_이름} Zanussi ZFT11100WA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFT11100WA 16 페이지. Zanussi freezer user manual
Zanussi ZFT11100WA에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Important! The wires in the mains lead are

coloured in accordance with the following code:

A Green and Yellow:

C Brown:

D Blue:

As the colours of the wires in the mains lead of

this appliance may not correspond with the col-

oured markings identifying the terminals in your

plug, proceed as follows:

Technical data

Dimension

Rising Time

Voltage

Frequency

The technical information are situated in the rat-

ing plate on the internal left side of the appli-

ance and in the energy label.

www.zanussi.com

Earth

Live

Neutral

Height

Width

Depth

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

letter "E" or by the earth symbol

oured green and yellow.

2. Connect the wire coloured blue to the ter-

minal either marked with the letter "N" or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or col-

oured red.

4. Check that no cut, or stray strands of wire

is present and the cord clamp E is secure

over the outer sheath.

5. Make sure the electricity supply voltage is

the same as that indicated on the appliance

rating plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug

fitted B. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA ap-

proved (BS 1362) fuse must be used.

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that it is disposed of safely.

850 mm

550 mm

612 mm

22 h

230-240 V

50 Hz

or col-