Zanussi ZFT610X 사용자 설명서 - 페이지 10
{카테고리_이름} Zanussi ZFT610X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFT610X 16 페이지. Freezer zft 610 x
Zanussi ZFT610X에 대해서도 마찬가지입니다: 지침서 (16 페이지)
페이지 인쇄
Levelling
When placing the appli-
ance ensure that it stands
level. This can be ach-
ieved by two adjustable
feet at the bottom in front
(2). If necessary adjust
the feet by removing the
spacer (1).
Location
The appliance should be installed well away from sources of heat
such as radiators, boilers, direct sunlight etc. Ensure that air can
circulate freely around the back of the cabinet. To ensure best per-
formance, if the appliance is positioned below an overhanging wall
unit, the minimum distance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally, however, the appliance
should not be positioned below overhanging wall units. Accurate
levelling is ensured by one or more adjustable feet at the base of the
cabinet.
If the cabinet is placed in a corner and the side with the hinges fac-
ing the wall, the distance between the wall and the cabinet must be
at least 10 mm to allow the door to open enough so that the shelves
can be removed.
Door reversibility
Important! To carry out the following operations, we
suggest that this be made with another person that will
keep a firm hold on the doors of the appliance during the
operations.
10
1
2
Warning!
It must be possible to disconnect the appliance
from the mains power supply; the plug must
therefore be easily accessible after installation.
To change the opening direction of the door, do these
steps: