Zanussi ZNHN18FS1 사용 설명서 지침 - 페이지 16

{카테고리_이름} Zanussi ZNHN18FS1에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZNHN18FS1 21 페이지.
Zanussi ZNHN18FS1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

Problem

Temperature setting LEDs ﬂash

at the same time.

If the advice does not lead to the

desired result, call the nearest

Authorized Service Centre.

REPLACING THE LAMP

The appliance is equipped with a longlife LED

interior light.

Only service is allowed to replace the lighting

device. Contact your Authorised Service Centre.

Possible cause

The food products' tempera-

ture is too high.

Many food products are stored

at the same time.

The door has been opened of-

ten.

The FastFreeze function is

switched on.

There is no cold air circulation

in the appliance.

An error has occurred in meas-

uring the temperature.

CLOSING THE DOOR

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

installation instructions.

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

Solution

Let the food products temper-

ature decrease to room tem-

perature before storage.

Store less food products at the

same time.

Open the door only if necessa-

ry.

Refer to "FastFreeze function"

section.

Make sure that there is cold air

circulation in the appliance.

Refer to "Hints and Tips" chap-

ter.

Contact the nearest Author-

ised Service Centre. The cool-

ing system will continue to

keep food products cold, but

temperature adjustment will

not be possible.