Zanussi ZPL 7120 지침 책자 - 페이지 10

{카테고리_이름} Zanussi ZPL 7120에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZPL 7120 10 페이지.

Unplug the appliance before carrying out any

maintenance operation.

Warning

This appliance contains hydrocarbons in its

cooling unit maintenance and recharging must

therefore only be carried out by authorized

technicians.

Internal clearing

Never use metal objects for clearing your

appliance as it may get damaged.

When performing a complete defrosting, wash

the internal surfaces of the freezer with lukewarm

water and bicarbonate; rinse and then accurately

dry.

External clearing

Wash the outer body with lukewarm water and

soap. Periodically use a clearing polish to keep

the outer body shining. Dust the condenser

located behind the freezer with a soft brush or a

vacuum cleaner. An excessive accumulation of

dust might compromise the freezer's efficiency.

Whenever the freezer is not to be used for an

extended period of time, disconnect it from the

wall socket and empty and clean the freezer.

Remember to leave the door open for the entire

period of time in which the freezer is not to be

used.

Before calling your local dealer for servicing

assistance, check the following points to see if

you may not resolve the problem yourself:

Make sure that the freezer is plugged into the

wall socket correctly, and that electrical current

arrives to the freezer without interruption.

Control the thermostat setting.

In the event that the freezer makes excessive

noise or vibration, make sure that it is not in

direct contact with the wall or adjacent furniture.

MAINTENANCE

If defective operation continues after these

controls, call your local Service Network and

provide all the data listed on the rating plate:

model, serial number, etc.