Zanussi ZRT 1646 지침서 - 페이지 6

{카테고리_이름} Zanussi ZRT 1646에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZRT 1646 16 페이지.

Using the Appliance

Remove all securing tapes.

Wash the inside of the appliance with lukewarm water

with a little bicarbonate of soda added (5 ml to 0,5 litre

of water). Do not use soap or detergent as the smell

may linger. Dry the appliance thoroughly.

Do not use detergents, abrasive powders,

highly perfumed cleaning products, wax

polishes or products containing alcohol.

1. Allow the appliance to stand for 2 hrs after

installation.

2. Plug in the appliance and switch on at the mains

supply.

3. Turn the thermostat control to the required setting.

A setting of 3 is usually suitable for normal

operation (see thermostat control).

4. Leave the appliance for approximately 4 hours for

the correct temperature to be reached before

placing food inside.

The thermostat control situated inside the refrigerator

regulates the temperature of the larder compartment.

Thermostat control is marked from 1-5 the higher the

number, the colder the setting.

Position 0

- Off

Position 1

- minimum coldness

Position 5

- maximum coldness

Below is the recommended storage positions for

various food types:

1. Ready-cooked foods, convenience foods, fresh

meat, cold cuts

2. Milk, dairy products, foods in dishes

3. Fruits, vegetables, salads

4. Cheese, butter

5. Eggs

6. Yoghurt, sour cream

7. Small bottles, soft drinks

8. Large bottles, drinks