Zanussi ZU 790 F 지침 책자 - 페이지 8

{카테고리_이름} Zanussi ZU 790 F에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZU 790 F 16 페이지.
Zanussi ZU 790 F에 대해서도 마찬가지입니다: 지침 책자 (16 페이지)

Check the position again by slackening the

screws and pins then, once the best position

has been obtained, fully tighten all the fixings.

Cover the visible part of the top bracket on the

panel with plastic cover (D), inserting it in the

locations provided in the bracket.

Once the door has ben correctly aligned, tighten

the holding nuts on the fixing brackets and

attach the appliance to the adjacent units and

the bottom of the work surface (Fig. 11).

For a correct installation operation if the base

plate is more than 100 mm (for cavity height

820 mm) or more than 150 mm (for cavity

height 870 mm) you must cut out the plate as

shown in Fig. 12.

D472

D517

D593

Fig. 10

Fig. 11

Fig. 12