Zanussi ZUHE30FW2 사용자 설명서 - 페이지 10

{카테고리_이름} Zanussi ZUHE30FW2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZUHE30FW2 28 페이지.
Zanussi ZUHE30FW2에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)

• Before using your freezer, wipe all parts with a solution of warm water and a teaspoon of

sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the freezer

after cleaning.

• Use the adjustable front legs to make sure your appliance is level and stable. You can

adjust the legs by turning them in either direction. This must be done

before placing food in the appliance.

• Install the two plastic distance guides (the parts on the black vanes

-condenser- at the rear) by turning it 90° (as shown in the figure) to

prevent the condenser from touching the wall.

• The distance between the appliance and back wall must be a maximum

of 75 mm.

• For Side by Side niche installation please refer to the Joining Kit provided with the

cabinet freezer and its installation manual (NOTE joining kiti).

Before using your freezer

• When using your freezer for the first time, or after transportation, keep it in

an upright position for at least 3 hours before plugging into the mains. This

allows efficient operation and prevents damage to the compressor.

• Your freezer may have a smell when it is operated for the first time. This is normal and

the smell will fade away when your freezer starts to cool.

Internal lighting

WARNING!

Risk of electric shock.

• Concerning the lamp(s) inside this product and spare part lamps sold separately: These

lamps are intended to withstand extreme physical conditions in household appliances,

such as temperature, vibration, humidity, or are intended to signal information about

the operational status of the appliance. They are not intended to be used in other

applications and are not suitable for household room illumination.

EN - 10 -