Zanussi ZUNN26FX 사용자 설명서 - 페이지 8
{카테고리_이름} Zanussi ZUNN26FX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZUNN26FX 21 페이지.
페이지 인쇄
CONTROL PANEL
Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
It is possible to change predefined sound of
buttons by pressing together Mode and
DISPLAY
A
SWITCHING ON
1. Connect the mains plug to the power socket.
2. Press the appliance ON/OFF if the display is
off. The temperature indicators show the set
default temperature.
To select a different set temperature refer to
"Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .
SWITCHING OFF
1. Press the appliance ON/OFF for 3 seconds.
The display switches off.
2. Disconnect the mains plug from the power
socket.
TEMPERATURE REGULATION
Set the temperature of the appliance by pressing
the temperature regulators.
Default recommended set temperature is:
8
6
B
C
F
E
D
1
5
4
3
Mode
5
ON/OFF
6
temperature colder button for a few seconds.
Change is reversible.
A. Timer indicator
B. FastFreeze function
C. Temperature indicator
D. Alarm indicator
E. ChildLock function
F. DrinksChill function
•
-18°C for the freezer
The temperature range may vary between -15°C
and -24°C for freezer.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set
temperature remains stored.
FASTFREEZE FUNCTION
The FastFreeze is used to perform pre-freezing and
fast freezing in sequence of Freezer compartment.
This function accelerates the freezing of fresh food
and, at the same time, protects foodstuffs already
stored from undesirable warming.
2