Zanussi ZV 210 R 지침 책자 - 페이지 8

{카테고리_이름} Zanussi ZV 210 R에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZV 210 R 9 페이지.
Zanussi ZV 210 R에 대해서도 마찬가지입니다: 지침 책자 (10 페이지), 지침 책자 (11 페이지)

페이지 인쇄

1. Control Panel

Rear spacers

The plastic bag containing all relevant

documentation also contains two rear wall spacers to

be fitted into special slots on the back of the

appliance. Fit the spacers into the slots, taking care

to ensure that the arrow (A) is positioned as shown

in the figure. Next, turn them through 45¡ (arrow in

vertical position) until they lock into place.

Door reversal

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

1. dismantle the lower hinge (3), pin (1) and the

screw (2);

2. slide the door out from pin (G),unscrew the pin

and reposition on the opposite side;

3. unscrew the left front foot and reposition on the

opposite side;

4. unscrew the two screws which mask the holes for

fixing the hinge from the left front side;

5. reassemble the door;

6. reassemble the lower hinge (turning it 180¡), the

pin and the screw on the opposite side, as shown

in the figure;

7. dismantle the handle and reassemble it on the

opposite side.Cover the holes left open with the

plugs contained in the documentation pack.

Warning:

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold (i.e.

in Wõnter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the

gasket or accelerate this process by heating up the

part involved with a normal hairdrier.

PR60

D299

D162