Zanussi zvc45 매뉴얼 - 페이지 7

{카테고리_이름} Zanussi zvc45에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi zvc45 16 페이지. Zanussi freezer user manual
Zanussi zvc45에 대해서도 마찬가지입니다: 지침 책자 (16 페이지)

페이지 인쇄

Door reversal directions

(Fig. 3)

Before carrying out the operations described below,

pull out the mains plug from the wall socket.

To carry out this reversal go through the following

steps:

Gently lay the freezer on its back with the top

held away from the floor by 5-8 cm (2-3 inches) of

packing.

Remove the bottom door hinge (5).

Remove the freezer door (4) by opening it and

pulling it gently downwards to remove it from the

top hinge pin (2).

Unscrew the top hinge pin (2) from the top

hinge (1) and replace it in the opposite hole on the

left hand side.

Unscrew the foot at the base (6) of the appliance

and refit it on the opposite side.

Refit the freezer door and the bottom hinge to the

left hand side.

Remove the door handle (3) and fit it on the

opposite side by removing the plastic plugs from

the fixing holes and fitting them in the vacated

holes on the opposite side. (Protect the paintwork

with masking tape).

When the bottom hinge is screwed in, a certain amount of

force is exerted on the screws.

It is therefore advisable to lubricate the screw tips before

starting this operation.

Attention

After completion of the door reversal operation,

verify that the door gasket is sealing onto the

cabinet.