Zanussi ZVF 200 RM 지침 책자 - 페이지 5
{카테고리_이름} Zanussi ZVF 200 RM에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZVF 200 RM 13 페이지.
If this appliance – equipped with magnetic door seals
– replaces an older appliance featuring a spring lock
(mechanical latch) on the door or lid, please ensure
that this lock is made completely unusable before
«throwing out» the old appliance. This will prevent it
from becoming a death-trap for a child.
Location
Place the appliance as far away as possible from
sources of heat, e.g. radiators, heaters, direct sunlight,
etc. Best performance is obtained with ambient
temperature between +18 C and +43 C (class T);
+18 C and +38 C (class ST); +16 C and +32 C (class
N); +10 C and +32 C (class SN).
The class of your appliance is shown on its rating
plate.
For safety reasons, minimum ventilation must be as
shown in Fig. 1:
Appliance positioned under overhanging kitchen wall
units (see Fig. 1-A).
Appliance positioned without overhanging kitchen
units (see Fig. 1-B).
Attention: keep ventilation openings clear of
obstruction.
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
Rear spacers
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure.
Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.
INSTALLATION
A
NP007
PR153
Fig. 1
B
Fig. 1a
GB
47