Zanussi ZYNN9EW0 사용자 설명서 - 페이지 8

{카테고리_이름} Zanussi ZYNN9EW0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZYNN9EW0 21 페이지.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

LEVELLING

When placing the appliance make sure that it

stands level. This can be achieved by two

adjustable feet at the bottom in front.

DOOR REVERSIBILITY

WARNING! Before carrying out any

operations, remove the plug from the

power socket.

1. Make sure the appliance stands upright.

2. Open the door and remove the door

equipment. Refer to the "Daily Use" chapter.

Close the door.

3. Unscrew the screws on the back of the top

cover.

4. Lift the top cover and place it on a soft surface.

5. Unscrew the 4 screws that connect the upper

hinge. Put the upper hinge in a safe place

together with the screws.

6. Lift the door and put it on a soft surface.

7. Tilt the appliance carefully on a soft foam

packaging or similar material to avoid any

damage to the back of the appliance and the

floor.

8. Unscrew the screws of the bottom hinge and

adjustable feet.

9. Install the pin in the opposite hole of the hinge.

10. Screw the bottom hinge on the other side of

the appliance.

11. Install the rubber support on the side with no

hinge.

12. Fit the door on the lower hinge making sure the

hinge pin enters the door bottom hole.

13. Install the upper hinge on the opposite side of

the appliance. Fit the upper hinge pin into the

door upper hole. Tighten the screws.

14. Screw the remaining 2 screws on the top side

of the appliance with no hinge.

15. Place the top cover on the appliance and

tighten the screws on the back.