Zanussi ZHC 916X 지침 책자 - 페이지 11

{카테고리_이름} Zanussi ZHC 916X에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC 916X 21 페이지. Cooker hood
Zanussi ZHC 916X에 대해서도 마찬가지입니다: 지침 책자 (24 페이지)

Please ensure that when the appliance is installed it

is easily accessible to an engineer in the event of a

breakdown.

All installations must comply with the

local authorities requirements for the

discharge of exhaust air.

Incorrect installation may affect the

safety of this cooker hood.

Before installation check the wall to

which the cooker hood is to be fitted for

electric cables, water pipes or gas.

The cooker hood is designed to be fixed to a solid block

or brick wall over a cooking area. If not, suitable fixings

must be used for other types of walls. The hood can be

used in the extraction (ducted to the outside) or

recirculation (internal recycling) mode.

The Installation work must be undertaken by a qualified

and competent person. The manufacturer disclaims any

responsibility to damages due to incorrect installation of

the cooker hood or if the cooker hood is not installed in

compliance with relevant regulations controlling this type

of installation.

Unpacking

Before unpacking the cooker hood position the carton

with the arrows pointing upwards as illustrated on the

carton.

The ZHC916 is supplied with the following

components for installation:

1 No. Canopy including controls and worktop illumination (C).

1 No. Telescopic chimney stack complete with fan motor (A).

1 No. Flange 120mm (F).

1 No. Collar 120-125mm (D)

1 No. Venting grille (G).

1 No. Spigot (R).

1 No. Ducting conversion bend (W)

1 No. Support Rod (B)

INSTALLING THE COOKER HOOD